Water cooled panel Three phase AC 30T Electric Arc Furnace EAF

1. Characteristic:

1. Smelting temperature is flexible to be controlled, meet different steel grade production needs.

2.High heat efficiency, atmosphere inside furnace can be controlled.

3.Can remove the phosphorus, sulfur, oxygen and other impurities and improve steel quality.

4. Easy to control the chemical composition of steel, stable and high recovery rate of alloys.

5.Equipment is simple and shorter technological process.

2. Overview

Steelmaking electric arc furnace (EAF) is divided into normal power, high power and ultra high power according to matched power.

There are left operation and right operation types for end user’s option.

It could be divided into continuous charging and non-continuous charging according to loading pattern.

The electric arc furnace consists of furnace body, furnace roof (lid), tilting device, furnace lifting & rotating device, electrode lifting device, water-cooling device, hydraulic device, furnace transformer, secondary bus bar system, HV cabinet, LV electric and automatic control system etc.

3. Function

1. Used for scrap melting, decarbonization, dephosphorization, desulfuration, deoxygenation and molten steel heating etc., for melting steel in different grades and composition.

2. Partial hot metal charging or charging pig iron, sponge iron (DRI) and hot briquetted iron (HBI).

3. Additional charging during the melting process and primary alloying process.

4. Main characteristics

1. Refractory material saving due to the water cooled roof and water cooled panels.

2. Slag less tapping and tapping temperature reducing result from EBT.

3. Impendence of large current reducing due to the cooper and steel composited conductive arm and large section water cooled cable.

4. Power consumption for per ton of steel and smelting period are reduced due to adopting furnace door C-O lance and furnace wall coherent oxygen lance.

5). Fume collection rate is increased due to adopting furnace roof fourth hole and other fume discharging methods.

6). Scrap steel continuous charging and preheating system could be applied thus save energy, reduce consumption and improve smelting efficiency.

7). Raw material (DRI, HBI), lime and alloy automatic charging system could be equipped.

8). Equipped with advanced PLC control system and smelting model.

Beijing Sino Steel Engineering & Equipment Co., Ltd. is concentrating on developing of ferrous & non-ferrous making and Rolling technology, mainly.

As one of the most experienced Chinese suppliers of complete line and components for steel and non-ferrous industries, Beijing Sino Steel Engineering & Equipment Co., Ltd. is engaged in design, manufacturing, engineering and service activities on word-wide basis.

Overseas Partners (Office):

India, Indonesia, Malaysia, Thailand, Korea, Turkey, UAE, Qatar, Iran, Saudi Arabia, Kuwait, Germany, France, Canada, USA, Brazil, Etc.

MAIN SCOPE SUPPLY:

EPS Project Line:

EAF, LF, Continuous Casting Machine, Preheating Furnace, Hot Rolling Mill Line, Cold Rolling Line, Centrifugal Casting Line, Slitting Line,Cut-to-length Line, Cleaning Line, Pickling Line, Coating line, Levelling line, Billet grinding line ETC.

Components & Parts:

Mill stand, Coiler, Uncoiler, Gearbox, Leveller, Copper Mould Tube, Copper Mould Plate, Water Jacket, Water Cooled Cable, Forged Rolls, Casting Rolls, Roll Shell, Roll Core,Bearing, Universal Shaft, Lathe, ETC.

​